NFD85R5S Issued March 31, 2009© 2009 by Senco Products, Inc.GT65DA / GT65RHACORDLESS FINISHING NAILER
10EnglishSafety Warnings Do not puncture or attempt to open battery case.. Do not immerse battery in water. Do not expose battery to water, rain or
11EnglishSafety WarningsCharger Safety Warnings Do not use a defective battery charger, one that over-heats and/or smokes when plugged in. EXPLOSION
12EnglishSafety Warnings To reduce risk of electric shock, unplug charger from outlet by wall mount unit. Do not unplug charger by pulling on cord.
13EnglishTool Use Load battery, contacts rst into the tool. Push battery fully forward into locked position. Use only SENCO batteries. Press down o
14EnglishTool Use Open fuel cell door at top of the tool. With the metering valve stem pointed toward the front of the tool, insert the fuel cell/va
15EnglishTool Use Tool has a safety lock-out fea-ture, which leaves approximately 6 fasteners in the magazine and will not actuate. Press safety aga
16EnglishTool Use Before attempting to remove a jammed fastener, remove fuel cell and battery. With nger away from trigger, remove nail strip from
17MaintenanceEnglish All screws should be kept tight. Loose screws result in unsafe operation and parts breakage. With tool unpowered, make daily in
18EnglishTroubleshootingSYMPTOMBattery does not accept charge.SOLUTIONMonitor charging time to ensure battery has adequate time for recharging.Replace
19EnglishTroubleshootingSYMPTOMTool operates properly, but fasten-ers do not drive fully.SOLUTIONChange Depth of Drive setting adjustment feature.Chec
2EspañolEnglishFrançaisEMPLOYER’S RESPONSIBILITIESIt is the employer’s responsi-bility to assure this manual is read and understood by all person
20EnglishSpecicationsFrançaisSpecicationsAmm323844505765inches1 1/41 1/21 3/422 1/42 1/2CodeDA15DA17DA19DA21DA23DA25Amm323844505765pouces1 1/41 1/21
21EspañolESPECIFICACIONES TECNICASNombre de la herramienta: GT65DATipo de herramienta: Combustión, linealTamaño de la herramienta: Peso: 5,2 lbs
22EnglishEspañol Français1 Informations sur le bruitLes valeurs de bruit sont caractéri-stiques de l’outil et ne représentent pas le niveau de bruit d
Limited Warranty SENCO® Pneumatic, DuraSpin®, Cordless Tools & CompressorsSenco Products, Inc. (“SENCO”) designs and constructs its products usin
NOTES:24
3Tool Operation Operación de la Herramienta Utilisation de l’OutilE n g l i s h E s p a ñ o l F r a n ç a i s
4EspañolEnglishFrançaisDescriptionThe GT65 is a self contained, fully portable nailer that uses liquid hydrocarbon fuel to power a linear drive intern
5EnglishSafety WarningsGeneral Safety Warnings Read and understand tool labels and manual. Failure to follow warnings could result in DEATH or SERIOU
6 Do not overreach. Keep pro-per footing and balance at all times. Proper footing and balance enable better control of the tool in unexpected situati
7Tool Safety WarningsEnglishSafety Warnings Do not drive fasteners close to the edge of the work sur-face. The workpiece is likely to split and the f
8EnglishSafety WarningsTool Safety Warnings Remove battery and fuel cell from tool before doing tool maintenance, clearing a jammed fastener, leaving
9EnglishSafety WarningsFuel Cell Safety Warnings Read the Safety Data Sheet (SDS) for more information on contents of fuel cell. Fuel cell con-tains
Comments to this Manuals